5a x 12 channel LED DMX Driver

The StudioPro 12 Channel DMX Digital Decoder – 5A per Channel is a robust 12-channel digital DMX decoder with an adjustable PWM output of 500Hz to 30kHz. This decoder is highly configurable and features a convenient digital display.

12 volt power supply is pre-installed.

The display allows the setup of DMX addresses without the use of DIP switches. It can also change the PWM frequency and dimming curve to suit your project’s specific needs.

The decoder supports 12 channels with a maximum of 5 amps per channel. This means you can drive up to 720W/1440W per receiver at 12V/24V respectively. This decoder has 3 terminal blocks that each have 4 channels.

The decoder also supports an 8-bit or 16-bit gray-scale control on the output
channels.

Features List:

12 channels

3 terminal blocks with 4 channels each

5 amps per channel maximum sustained power

12 or 24 VDC input and output

Digital readout legibly displays the DMX address, which is useful in dimly lit rooms

Easily change DMX address without DIP switch math

Converts standard DMX signal to PWM output suitable for driving 12 or 24 VDC LED lighting

The buttons below the display screen allow you to set the decoder’s lowest address so it uses the address you desire from your DMX program

Standalone mode – no software required
Field controllable
RDM compatible
Ability to adjust the number of output channels

High 12 x 5A current capacity means it can drive up to 720W/1440W per receiver at 12V/24V respectively

Adjustable PWM frequency. Choose a preset value between 500 Hz and 30,000 Hz